Quick and easy radio to team speak gateway roip. Using Baofeng UV 5r also works for other models. Make up a set of audio cables to connect the radio to the PC. Standard audio cables will not work. Ideally a resistor in line will save over driving your sound card and a filter wouldn’t go a miss but for simplicity sake this works just fine. Make sure when first connect that the volume on the Radio is turned down by opening up the volume mixer on pc and turning squelch off on the radio you can slowly bring the volume up on the radio to a reasonable level to trigger the vox on team speak. Teamspeak auto adjusts mic levels so as long vox is set it will key up on channel. On teamspeak set the delay to 2.8 or max found under advanced settings on capture device. This will ensure that when you pause while talking the ptt will not drop. We have a team speak sever with a test room which you are welcome to use to test your gateway and their is usually someone online who can help with the levels set up. If not sure how to make your own cables or want some advice please feel free to msg. You can also use Frn instead of Team speak if preferred.